22.6. Adjustment of provision of a front bumper

Adjustment of provision of a front bumper in the blow shock-absorber

Fig. 3.2-1. Arrangement of the screw of fastening of the left ventilating grate



Unscrew screws of fastening of the left and right ventilating grates of a bumper and remove lattices (see fig. 3.2-1).

Fig. 16-2. Fastening of a front bumper (2) to the shock-absorber of blow (3): 1 – bolt



From below a bumper unscrew bolts of fastening of a bumper (see fig. 16-2).

Fig. 16-5. Adjustment of provision of a front bumper in the blow shock-absorber: 1 – bolt; 2 – arm; 3 – blow shock-absorber; 4 – carving plug; 5 – face key; 6 – amplifier of a bumper



Through an opening for ventilating grates insert a face key of 5 (fig. 16-5) into the carving plug 4 shock-absorbers of blow 3.
Rotating in this or that party the carving plug 4 in the shock-absorber of blow 3, adjust the provision of a forward part of a bumper on height.
Screw in bolts of fastening of a bumper.
Establish and fix ventilating grates.

Adjustment of provision of a front bumper in an arm
Unscrew a bolt 1 (see fig. 16-5) fastenings of a side arm of a bumper on several turns.
Adjust the provision of side parts of a bumper in relation to forward wings, moving an arm 2 forward or back.
Tighten a bolt of fastening of a side arm of a bumper.