22:14. Door upholstery
Fig. 16-12. Door upholstery: 1 – internal upholstery of a door; 2 – alarm lamp of an open door; 3 – clip; 4 – holder of a clip; 5 – bolt. 1,7 N · m; 6 – blocking button; 7 – a protective film (shooters showed places of fastening by its adhesive tape); 8 – decorative panel; 9 – bolt, 1,8 N · m; 10 – internal handle of opening of the lock of a door; 11 – the top section of a slip with switches; 12 – bolts, 1,8 N · m; 13 – basis of the internal handle of a door; 14 – the lower section of a slip with switches; 15 – screw; 16 – bolts, 4,6 N · m; 17 – the space lighting lamp at an entrance and an exit of passengers
|
The upholstery of a door is shown in fig. 16-12.
Removal
Fig. 16-13. Elements of fastening of the decorative panel to a door upholstery: 1 – holder of a clamp; 2 – clamp; 3 – decorative panel
|
Screw-driver edge as the lever separate the decorative panel from a door upholstery, at the same time clamps of the decorative panel have to leave holders in an upholstery of a door (fig. 16-13).
Press on distance about 4 mm clamps 2 in the extending holders of 1 clamps and remove holders of clamps from a door upholstery.
Fig. 16-14. Use of the screw-driver for separation from an upholstery of a door of the basis of the internal handle of a door
|
Using a screw-driver edge as the lever, separate the basis of the internal handle of a door from an upholstery and remove its (fig. 16-14).
Fig. 16-15. An arrangement of screws (3) fastenings of the top section of a slip with switches (2) to an upholstery of a door (1)
|
Through the opened opening unscrew two screws of fastening of the top section of a slip with switches (fig. 16-15).
Raise a back part of the top section of a slip with switches and, having pulled back, disconnect a forward part from a door upholstery. Disconnect electric sockets from switches.
Fig. 16-18. An arrangement of a bolt (1) of fastening of the lower section of a slip with switches (2) and the electric socket (3)
|
Unscrew the screw and, moving back, remove from a door upholstery the lower section of a slip with switches (fig. 16-18).
Remove razzhimny clamps from a door upholstery.
Lifting a door upholstery up, remove its top part from the button of blocking of the lock of a door.
Incline an upholstery of a door and disconnect the electric socket from the door lock switch.
Fig. 16-20. Arrangement of a clip (1) of fastening of draft (2) of the internal handle of opening of a door and clamp (3) fastenings of the internal handle of opening of a door
|
Using a screw-driver edge as the lever, remove a clip of fastening of draft of the internal handle of opening of a door (fig. 16-20).
Fig. 16-21. An arrangement of the screw (1) of fastening of an air branch pipe (2) to a door upholstery
|
Disconnect all fastenings of a plait of wires from an upholstery of a door and remove a plait of wires.
Remove a protective film from a door.
Installation
Before installation of an upholstery of a door check a condition of razzhimny clamps of an upholstery and if necessary replace the damaged clamps. Establish clamps in grooves in a door upholstery.
The upholstery of a door is established in the sequence, the return to removal.
Connect a wire of "weight" to the rechargeable battery.