22:10. Forward wing
The forward wing and elements of its fastening are shown in fig. 16-8.
Remove a front bumper.
Unscrew screws and remove facing of a niche of a forward wheel.
Remove the side repeater of turns.
Unscrew bolts of fastening of a forward wing of 1, 3, 4 and 5 (fig. 16-8). In order to avoid damage of a paint and varnish covering tape the place about screws of fastening of a wing.
Remove a wing from the car.
Installation is carried out to the sequences, the return to removal, taking into account the following.
Install a forward wing on the car, combine openings under bolts and tighten bolts the moment of 9,5 N · m. At installation of a wing check that gaps between a wing and a cowl, and also between a wing and a forward door were uniform on all length and made 3,5 mm.