22:27. Dashboard
Removal
Fig. 16-61. Dashboard: 1 – nut, 6 N · m; 2 – ABS/EDL control unit; 3 – bolt, 1,5 N · m; 4 – ventilating grate; 5 – dashboard; 6 – bolt, 45 N · m; 7 – laying; 8 – nut; 9 – arm of a forward rack; 10 – dashboard basis; 11 – nut, 10 N · m; 12 – bolts, 10 N · m; 13 – dashboard arm; 14 – bolt, 22 N · m; 15 – bolt, 7 N · m; 16 – arm; 17 – nut; 18 – air duct; 19 – arm of support of the dashboard; 20, 21 – bolts, 22 N · m; 22 – screws, 2,5 N · m, 23 – the lower overlay of a steering column
|
Close seats of the driver and the forward passenger a cover.
Include ignition.
On cars with electric adjustment of seats move them back against the stop.
Establish the helmsman a wheel for the movement directly forward.
Close folding shutters of air vents for what press the Def button on the control panel of the conditioner.
Before a detachment of the rechargeable battery find out whether you have a code of turning on of the radio receiver.
Switch off ignition and disconnect a wire of "weight" from the rechargeable battery.
Unscrew screws and remove the lower finishing of the panel with the ware shelf from the driver.
Unscrew screws and remove a ventilating grate in deepening for the driver's legs.
Disconnect the electric socket from an illumination lamp in deepening for legs of the driver and remove a lamp.
Remove a ware box.
Remove overlays of thresholds of forward doors.
Remove the central console.
Remove a steering wheel.
Remove the caps located under a combination of devices for what, pressing, move them to the center.
Disconnect electric sockets from a back part of a combination of devices.
On models with electric adjustment of provision of a steering column disconnect the electric socket from the switch of adjustment of provision of a steering column. Unscrew bolts of fastening of the switch and remove it.
Remove a self-return ring with the electric socket and a ring of sliding.
Fig. 16-63. Elements of fastening of switches of a steering column: 1 – left switch of a steering column; 2 – screw;
3 – tightening bolt; 4 – right switch of a steering column
|
Remove the right switch 4 of a steering column together with the wires connected to it.
Weaken tightening a bolt 3 and remove the left switch of 1 steering column.
Disconnect electric sockets from switches.
Fig. 16-64. An arrangement of the screw (1) with a washer (2) fastenings of the lower slip (3) steering columns
|
On cars with the automatic transmission disconnect a cable from the selector lever lock, turn a key in the lock of ignition and remove a cable.
Unscrew bolts of fastening of a steering column and lower it down. Do not pull a steering column on yourself and do not unscrew a nut of fastening of the universal hinge of a steering column.
Unscrew the ABS/EDL control unit from the dashboard basis.
In the presence separate the auxiliary relay from the dashboard basis.
Unscrew screws 1 and 3 (fig. 16-65) and remove an arm 2 supports of the dashboard from the basis of the dashboard and the tunnel of the transmission.
Disconnect the electric socket from the proofreader of light of headlights.
Remove a safety cushion from the passenger.
Fig. 16-66. An arrangement of bolts (1) of fastening of the holder (2) to an arm of a pedal and bolts (3) of the lower fastening of the holder
|
Unscrew bolts of fastening of the dashboard to arms of the left and right forward racks (fig. 16-67).
Disconnect air ducts from the left and right side of a casing of the distributor of air (fig. 16-68).
Pull the dashboard back and remove it. Operation is carried out with the assistant.
Installation
Install the dashboard in the car.
Check and if necessary adjust position of the dashboard on height selection of laying 2 (see fig. 16-67) the required thickness. The dashboard has to settle down at the level of an upholstery of forward doors.
Screw in bolts of fastening of the dashboard to arms of the left and right forward racks (see fig. 16-67).
Weaken bolts 3 (see fig. 16-66) the lower fastening of the holder in order that it could be moved.
Screw in bolts of 1 fastening of the holder 2 to an arm of a pedal and tighten their moment 22 N · m. Tighten bolts 3 lower fastenings of the holder the moment of 10 N · m.
Further installation is carried out to the sequences, the return to removal.