22:23. Casings of a steering column


Fig. 16-45. Casings of a steering column: 1 – overlay of the lower casing; 2 – lower casing; 3 – screws, 0,6 N · m; 4 – top casing; 5 – the switch of adjustment of provision of a steering column (for cars with the electric drive of adjustment of provision of a steering column); 6 – screw, 0,6 N · m; 7 – screws, 0,3 N · m; 8 – bolt, 0,6 N · m; 9 – screw, 3 N · m; 10 – handle of adjustment of provision of a steering column; 11 – bolt, 2,5 N · m



The lower and top casings of a steering column are shown in fig. 16-45.

Removal
Before a detachment of the rechargeable battery find out whether you have a code of turning on of the radio receiver.
Switch off ignition and disconnect a wire of "weight" from the rechargeable battery.

Fig. 16-46. Arrangement of screws of fastening of the top casing (1) of a steering column



Unscrew two screws of fastening and remove the top casing of a steering column (fig. 16-46).
Establish car wheels for the movement directly forward.

Fig. 14-2. Unscrewing of a bolt of fastening of a safety cushion to a steering wheel



Key unscrew the bolts of Torx of fastening of a safety cushion located on each side from the back party of a steering wheel (see fig. 14-2).

Prevention
The electric socket of a spiral of a steering wheel should not be disconnected at removal of a steering wheel.

Incline a safety cushion back, disconnect the electric socket and remove a pillow.
Disconnect the electric socket from a spiral of a steering wheel.
unscrew a nut (or a bolt) and remove the helmsman a wheel.
Having pulled on itself, remove an overlay of the lower casing.

Fig. 16-47. Arrangement of screws of fastening of the lower casing of a steering column: 1, 3, 5, 7, 8 – screws; 2 handle of adjustment of provision of a steering column; 4 – lower casing; 6 – switch of adjustment of provision of a steering column



On models with mechanical adjustment of provision of a steering column unscrew screws 1 (fig. 16-47) and remove the handle of adjustment of provision of a steering column.
Unscrew screws 7 and 8 and remove the lower casing of a steering column.
On models with electric adjustment of provision of a steering column disconnect the electric socket from the switch of adjustment of provision of a steering column. Unscrew bolts of fastening of the switch and remove it.

Installation
Installation is carried out to the sequences, the return to removal.