a5e4f70f

22:22. Cylinder of the lock of a ware box

Removal
For removal of the cylinder of the lock of a ware box it is necessary to use the screw-driver with a diameter of 1,6 and 40 mm long.
Remove a ware box and put it in deepening for the passenger's legs.

Fig. 16-41. The provision of a key and an arrangement of an opening for the screw-driver at removal of the cylinder of the lock of a ware box



Insert and turn on 45 ° a key in the cylinder of the lock of a ware box (fig. 16-41).

Fig. 16-42. Use of the screw-driver for release of the cylinder of the lock of a ware box



Insert the screw-driver into an opening for release of the cylinder of the lock and, pressing the screw-driver up, take the cylinder of the lock of a ware box with the inserted key (fig. 16-42).

Fig. 16-43. Weakening of a bolt with crosswise shliyets through an opening for the lock cylinder



Through an opening for the cylinder of the lock weaken a bolt with crosswise shliyets until clamps move back, and remove the locking mechanism (fig. 16-43) forward.

Fig. 16-44. A nut arrangement with a nakatka of fastening of a cable of the lock of a ware box



Turn a nut with an external nakatka of fastening of a cable, disconnect a cable from the lock of a ware box and remove the lock (fig. 16-44).

Installation
Installation is carried out to the sequences, the return to removal, taking into account the following.
If the ware box is not closed properly, adjust cable length an adjusting nut.