a5e4f70f

24:33. Forward switches of window regulators


Fig. 18-59. Use of the screw-driver for separation from an upholstery of a door of the basis of the internal handle of a door



Using a screw-driver edge as the lever, separate the basis of the internal handle of a door from a door upholstery and remove it (see fig. 18-59).

Fig. 18-60. An arrangement of screws (3) fastenings of the top section of a slip (2) with switches to an upholstery of a door (1)



Through the opened opening unscrew two screws of fastening of the top section of a slip with switches (see fig. 18-60).
Raise a back part of the top section of a slip with switches and, having pulled back, disconnect a forward part from a door upholstery. Disconnect electric sockets from switches.

Fig. 18-61. Arrangement of clamps (1) and direction (A) of removal of the switch (2) adjustments of provision of a mirror. Sleva: arrangement of four clamps (arrow) of fastening and direction of removal (V) of switches of window regulators



The small screw-driver release four clamps of fastening of the switch shown by shooters in fig. 18-61  at the same time pressing the switch in the direction of an arrow B, and remove the switch.
Installation is carried out to the sequences, the return to removal.