24:27. Switches of a steering column

Removal
Before a detachment of the rechargeable battery find out whether you have a code of turning on of the radio receiver.
Switch off ignition and disconnect a wire of "weight" from the rechargeable battery.
Establish wheels for the movement directly forward.
Lower a steering wheel down to an emphasis.

Fig. 18-50. Unscrewing of a bolt of fastening of a safety cushion to a steering wheel



Key unscrew the Torx-bolts of fastening of a safety cushion located on each side from the back party of a steering wheel (fig. 18-50).
Incline a safety cushion back, disconnect the electric socket and remove a safety cushion.

Fig. 18-51. Steering wheel, casings and switches of a steering column: 1 – top casing; 2 – the screw-driver (for an otvertyvaniye of the screw of fastening of switches of a steering column); 3, 5, 6 – screws, 0,6 N · m; 4 – the switch of adjustment of provision of a steering column (for cars with the electric drive of adjustment of provision of a steering column); 7 – lower casing; 8 – screw, 0,6 N · m; 9 – bolt, 2,5 N · m; 10 – bolt; 11 – steering wheel; 12 – nut; 13 – safety cushion


Unscrew two screws 8 (fig. 18-51) and remove the top casing of 1 steering column.
Disconnect the electric socket from a spiral of a steering wheel, unscrew a nut (or a bolt) and remove a steering wheel.
Having pulled on itself, remove facing of the lower casing.
Unscrew a nut 12 and remove a steering wheel. At removal of a steering wheel the electric socket of its spiral should not be disconnected.
On models with mechanical adjustment of provision of a steering column unscrew the screw and remove the handle of adjustment of provision of a steering column.
Unscrew screws 5, 6 and a bolt 9 and remove the lower casing 7 steering columns.
On models with electric adjustment of provision of a steering column disconnect the electric socket from the switch of adjustment of provision of a steering column. Unscrew screws 3 fastenings of the switch 4 and remove it.
The screw-driver 2 weaken the screw of fastening of switches of a steering column.
Disconnect electric sockets from switches of a steering column.
Remove switches from a steering column.

Installation
Install switches on a steering column.
Temporarily establish a steering wheel and fix it by a nut.

Fig. 18-52. Position of switches of a steering column at their installation: 1 – steering wheel; 2 – switches of a steering column; 3 – screw; and = 3 mm



Moving switches 2 (fig. 18-52) along a steering column, establish them in such situation that the gap and between switches and a steering wheel 1 made 3 mm, and in this situation tighten the screw 3 fastenings of switches.
Further installation is carried out to the sequences, the return to removal.