a5e4f70f

24:21. A back lamp in a wing

Removal
Open a trunk lid.
Remove an upholstery in the location of a back lamp.

Fig. 18-42. Elements of fastening of a back lamp in a wing: 1 – cover; 2 – latch; 3 – nuts; 4 – back lamp


Turn counterclockwise a latch 2 (see fig. 18-42) fastenings of a cover of 1 back lamp.
Take out from a back lamp the holder with lamps.
Unscrew four nuts 3 fastenings of a lamp and remove a lamp 4 outside of the car.

Installation
At installation of a lamp be convinced that laying is correctly located between a lamp and a body of the car.
Installation is carried out to the sequences, the return to removal.
Before tightening of nuts of fastening of a lamp check that gaps between a lamp and deepening of a wing were identical.