1.8. Adjustment of a steering column
|
Fig. 1-26. The directions of movement of the lock handle (A) at mechanical adjustment of provision of a steering column
|
Mechanical adjustment
The steering column can бесступенчато be adjusted on a tilt angle and height. For this purpose it is necessary to wring out the lock handle A (fig. 1-26) located under a steering column down and to establish a steering column in desirable situation. After that it is necessary to draw in the lock handle with effort up.
Preventions
It is necessary to regulate situation the helmsman of a column only on the motionless car.
For safety the lock handle always has to be drawn reliably in up that during the movement its situation could not change suddenly.
Electric adjustment
|
Fig. 1-27. Arrangement of the switch of provision of a steering column (A) and button (V) of movement of a steering column forward and up
|
The switch A (fig. 1-27) serves for stepless adjustment of a steering column on a tilt angle and height at the switched-off ignition.
For movement of a steering column up / down or press in the relevant party forward / back and hold the switch before installation of a steering column in required position.
On cars with memory of provision of a seat of the driver situation the helmsman of a column also remains in memory.
Landing simplification
For simplification of landing due to shift of a steering column in situation an entrance / exit serves the button B.
By pressing the button B the steering column will mix up forward and up. After inclusion of ignition the steering column comes back to a starting position.