1.15. Switches and switches


Fig. 1-43. An arrangement of switches and switches on the dashboard:
1, 8 – regulators of heating of seats; 2 – fog lights; 3 – tail fog light; 4 – heating of back glass; 5 – alarm light system; 6 – sun-protection curtain of back glass; 7 – movement of back head restraints


1, 8 – regulators of heating of seats (fig. 1-43).
The back and pillow of a seat can be warmed up by electric current at the included ignition.
The regulator 1 joins and heating of a seat of the driver, by the regulator 8 – heating of a seat of the forward passenger is smoothly regulated.
Heating of back sitting joins and smoothly changes the regulators located in a back part of the central console: a – at the left and b – on the right (fig. 1-44).

Fig. 1-44. Arrangement of regulators of heating of a back seat: and – at the left, b – on the right


Seats are warmed up only in that case when they are loaded with body weight.
If heating is included, marking of number on the regulator blinks.
For switching off of heating it is necessary to turn the disk regulator in a starting position.

2 – fog lights burn at the turned-on driving or passing light of headlights.
At inclusion of fog lights the control lamp in the switch lights up.

3 – tail fog light burns at the turned-on driving or passing light of headlights, and on cars with fog lights – and at inclusion of fog lights.
At inclusion of back fog lamps the control lamp in the switch lights up.
Because of the strong blinding influence back fog lamps should be included only at poor visibility.

4 – heating of back glass functions only at the included ignition. When heating is included, the control lamp in the switch burns.
On cars with the electric drive of adjustment of provision of external mirrors heating of their surfaces joins along with inclusion of heating of back glass.
As soon as back glass is exempted from fogging or ice, it is necessary to switch off heating immediately: electricity consumption reduction favorably influences fuel consumption.
At cars with the conditioner heating of back glass is automatically switched off in 10 min.
If on the car mirrors with heating are established, then at inclusion of a heater of back glass also heating of a mirror joins.

5 – the alarm light system functions also at the switched-off ignition.
The alarm system is turned on in the following cases:
– a car stop because of technical malfunction;
– road accident;
– at achievement of the end of traffic jam.
At the switched-on alarm system all indexes of turn, and also control lamps of inclusion of indexes of turn and a control lamp in the switch blink at the same time.

6 – sun-protection curtain of back glass. Quickly press the switch – the curtain will reveal and then will automatically be switched off. During movement of a curtain it is possible to change the direction of the movement by pressing the switch in an opposite direction.

7 – movement of back head restraints. Back head restraints with the electric drive can be moved on height, pressing the corresponding switch dashboards.

Fig. 1-45. Arrangement of the proofreader of light of headlights



Fig. 1-46. An arrangement of the switch of protivobuksovochny system (ASR) with reduction of torque of the engine



Fig. 1-47. Understeering switches of indexes of turn (V) and light of headlights (A)



Fig. 1-48. Arrangement of the switch (A) and key (V) of management cruise control



Fig. 1-49. Provisions of the understeering switch of a cleaner and washer of glasses: 0 – it is switched off; 1 – faltering movement of brushes; 2 – slow movement of brushes; 3 – bystry movement of brushes



Proofreader of light of headlights. By means of the adjusting mechanism with the electric drive it is possible to regulate smoothly a tilt angle of light of headlights according to car loading. Thanks to it the blinding action of headlights decreases by the driver of counter transport and visibility improves.
For lowering of a ray of light turn the regulator from a basic position (0) down.
Positions of the regulator correspond to the following loading of the car:
0 – passengers on front seats, a luggage carrier empty;
1 – passengers on all seats, a luggage carrier empty;
II – passengers on all seats, the luggage carrier is loaded;
III – only the driver, the luggage carrier is loaded.

Note
On cars with gas-discharge (xenon) lamps at inclusion of ignition the provision of headlights is automatically regulated depending on car loading.

The Protivobuksovochny system (ASR) with reduction of torque of the engine prevents pro-slipping of wheels at acceleration of all-wheel drive cars by deceleration of power of the engine. The system works in all high-speed range together with anti-blocking system. At violations in work the ABS system does not function.
The Protivobuksovochny system joins automatically at launch of the engine. It it is possible at desire to switch on and off pressing the switch.
When the system is switched off, the control lamp of ASR burns.
Usually the system has to be always included. The system is switched off only in exceptional cases when pro-slipping of wheels is necessary, for example, at the movement with antisliding chains, at the movement on deep snow or friable soil, when rocking of the got stuck car.
After overcoming such sites it is necessary to include protivobuksovochny system again.

Note
For ensuring trouble-free operation of protivobuksovochny system it is necessary to install identical tires on all wheels.

Understeering switches of indexes of turn and light of headlights

A – the switch of lighting can hold positions:
0 – lighting is switched off;
1 – the dimensional light is turned on;
2 – the driving or passing light is turned on.
External lighting works only at the included ignition.

In – the switch of indexes of turn and light of headlights. Indexes of turn work only at the included ignition.
For inclusion of the index of the right turn translate the switch up, for inclusion of the left turn translate the switch down.
At the included index of turn the control lamp blinks.
After turn passing the index of turn is automatically switched off.

Giving of a signal of turn before change of a lane. The switch should be pressed up or down to the moment of increase of counter-pressure and to detain in this situation – the control lamp has to blink along with the index of turn.

Light signal. To move the understeering switch to a steering wheel, at the same time the control lamp of driving beam will light up.

Switching to driving or passing beam of headlights. Switching at the turned-on passing or driving light is carried out by movement of the switch forward. When switching to driving beam the control lamp of driving beam lights up.
Parking light. Lamps of parking light burn only at the switched-off ignition.
Lamps of parking light on the right – the switch up.
Lamps of parking light at the left – the switch down.
After taking out of a key from the ignition lock at an open door of the driver the buzzer sounds.

Cruise control
The cruise control provides constancy of the set speed (over 30 km/h) if the engine can provide it, and exempts the driver from need pressing a pedal of an accelerator it to support.

Prevention
The cruise control should not be included at high intensity of traffic and in adverse road conditions (the icy or wet road, a gravel covering).

Cruise control operate by means of the movable switch A and a key B located on the understeering switch of indexes of turn and light of headlights.
To include a cruise control, shift the switch A in position of EIN.
When the desirable speed of the movement is reached, to press rather quickly the B (FIX) key. Now it is possible to remove a leg from an accelerator pedal. Speed of the movement is increased in the usual way – pressing an accelerator pedal. After a pedal otpuskaniye the cruise control will reduce the speed of the movement to a preset value. If the set speed was exceeded in 5 min. more than on 10 km/h, it is necessary to establish the necessary speed of the movement again.

Prevention
It is necessary to come back to the initial speed of the movement only in case of compliance of speed to specific conditions of the movement.
The established speed is reduced pressing a key B.
By each easy pressing of a key In speed in steps decreases. If to hold a key B pressed, speed decreases automatic movement of draft of an accelerator. At a key otpuskaniye the reached speed is entered into memory.
If to release a key at a speed below 30 km/h, the store is cleared and it is necessary to establish by a key In desirable speed after achievement by the car of speed over 30 km/h again.
The established speed can be increased, without pressing an accelerator pedal, moving of the switch A to position of AUFN.
By each easy pressing the movable switch to the left speed in steps increases. If to shift the switch to the left and to hold it in this situation, speed increases automatic movement of draft of an accelerator. At a switch otpuskaniye the reached speed is entered into memory.

Short-term shutdown cruise control
Cars with the mechanical transmission
For short-term shutdown the cruise control should be pressed a pedal of a brake or coupling or to shift the switch A in position of AUS (without its fixing).
The value of the set speed brought by this moment in memory remains.
For return to earlier set speed it is necessary to shift after an otpuskaniye of a pedal of coupling or a brake the switch A against the stop to the left.

Prevention
It is necessary to come back to earlier set speed of the movement only when this speed is not too high for directly forthcoming traffic conditions.

Cars with the automatic transmission
Short-term shutdown a cruise control is made by pressing a pedal of a brake or coupling or shift of the switch A in position of AUS (without its fixing).
The value of the set speed brought by this moment in memory remains.
For return to earlier set speed it is necessary to shift after an otpuskaniye of a pedal of coupling or a brake the switch A against the stop to the left.

Preventions
It is necessary to come back to earlier chosen speed of the movement only when this speed is not too high for directly forthcoming traffic conditions.
Besides, the cruise control is temporarily disconnected and when the selector is transferred to a N or 1 position (the 4-staged transmission), and also to a position 2 (the 5-staged transmission).
The value of the set speed brought by this moment in memory is erased from memory.

Storing of the chosen speed.
If at short-term shutdown in memory there was no speed or the set speed was erased, it is possible to establish new desirable speed to one of the next ways:
shift the switch A against the stop to the left and you keep it in this situation until desirable speed is reached;
quickly press a key B. In memory speed at the time of pressing of a key will be brought.

Switching off cruise control
Cars with the mechanical transmission
Final switching off a cruise control is carried out by shift of the switch A against the stop to the right (fixing in the provision of AUS) or on the motionless car – switching off of ignition.

Cars with the automatic transmission
Final switching off a cruise control is carried out by movement of the selector:
• in a position P, N or R;
• in a position 1 or 2 (the 4-staged transmission);
• on the standing car switching off of ignition.