18.6. Forward stabilizer of cross stability
Release clamps and remove the lower mudguard of a motor compartment (see fig. 3.1-1).
Fig. 12-15. Arrangement of a nut (1) of fastening of an earring and bolts of fastening (2) arms of the stabilizer
Unscrew bolts of fastening of 2 arms of the stabilizer.
Fig. 12-16. Fastening of an earring of the stabilizer of cross stability: 1 – stabilizer earring; 2 – lower cross lever; 3 – самоконтрящаяся a nut, 40 N · + to tighten m on a corner 90 °; 4 – clip; 5 – самоконтрящаяся nut, 90 N · m; 6 – stabilizer of cross stability
Installation is carried out to the sequences, the return to removal, taking into account the following.
The arrow on an earring of the stabilizer specifies the direction of movement.
Before a vvinchivaniye of bolts of fastening of an arm of the stabilizer by means of a tap clear a carving in openings for bolts.
If the stabilizer was replaced, install on it rubber plugs without lubricant