15.7. Cable of the selector of the automatic transmission

Fig. 9-10. An arrangement of electric sockets and wires on the selector of the automatic transmission: The 1-brown socket for illumination; 2 – the yellow socket for indication of position of the lever of the selector; 3 – the black socket for the selector lever N110 solenoid



Removal

Fig. 9-11. Arrangement and fastening of a cable of the selector: 1 – elements of fastening of a cable of the selector to a control lever of the automatic transmission; 2 – selector cable arm; 3 – selector cable; 4 – selector mechanism; 5 – fastening of a cable of the selector to the selector mechanism



Unscrew a nut, remove a washer and, having pulled, remove a selector cable from a control lever of the automatic transmission (see fig. 9-11).
Unscrew a bolt and remove an arm 2 with a cable from the automatic transmission.
Remove the central console.
Remove a forward guide of the masking panel.
Unscrew four bolts and remove adjusting plates.
With the assistant remove the selector with a cable from the car.
Disconnect a cable 3 from the selector 4 mechanism (poses. 5, fig. 9-11).

Installation
Installation is carried out to the sequences, the return to removal, taking into account the following.
Check correctness of installation of the condensing ring.