15.3. Repair of the mechanical transmission
The transmission represents the difficult unit therefore it is recommended to repair it at the company service enterprises. At removal and installation of many details it is necessary to measure gaps and if necessary to adjust them, using the corresponding adjusting laying and washers. If the transmission is faulty or works with strong noise, it is desirable to charge its repair to the expert or to replace the transmission that can cost considerably cheaper. However a part of malfunctions of the transmission can be eliminated without removal it from the car.
Despite all difficulties, the skilled expert can repair the transmission and in garage conditions, having the special tool and performing work consistently, step by step noting the executed operations. At repair of the transmission it is necessary to use special flat-nose pliers for removal of lock rings, strippers for bearings, the inertial hammer, a set of punches, a micrometer and a hydraulic press.
Before removal of the transmission try to define most precisely malfunction of the transmission that considerably will facilitate further repair.