19.5. Replacement of wheels
Take off a decorative cap of a wheel.
On the car standing on the earth turn on the parking brake and weaken bolts of fastening of a wheel.
Lift the relevant party of the car and fix on supports.
Disks from light alloys are protected from corrosion by a transparent varnish. Be careful not to damage a varnish covering. At damage of a covering cover a disk with a varnish coat.
For an exception of "prikipaniye" of disks of wheels to a nave before installation of a wheel apply a thin film of lubricant on the nave fillet aligning a disk.
Galvanized bolts of wheels can be applied only on steel stamped disks.
Disks from light alloys fasten only the chromeplated bolts with the conic rotating washer established under a bolt head. It protects a disk surface when tightening bolts.
Before a vvinchivaniye do not grease a carving of bolts of fastening of a wheel.
Tighten bolts of fastening of a wheel evenly in several stages on diagonal.
Moment of an inhaling of bolts of fastening of a wheel of 120 N · m.