9.4. Fuel broad tank
Before removal of a fuel broad tank remove protection of an arch of a back wheel.
The gravitational valve is not delivered as the separate spare part.
The valve is removed through the top part of a bulk mouth.
Check the valve as follows. At installation of the valve in vertical position it is open, and at an inclination on 45 ° – is closed.
At removal of a broad tank shift a connecting branch pipe, on a toplivonalivny pipe.
|
Fig. 5.1-1. Fuel broad tank: 1 – connection with "weight"; 2 – a fuel pipe from the fuel tank; 3 – a fuel pipe from the fuel tank; 4 – a fuel pipe from the fuel tank with white marking; 5 – a fuel pipe from the gravitational valve; 6 – a fuel pipe from a broad tank to the gravitational valve; 7 – gravitational valve; 8 – sealing ring; 9 – fuel broad tank; 10 – rubber cover of a mouth; 11 – cover of a bulk mouth; 12 – laying; 13 – lock ring of a rubber cover of a mouth; 14 – bolt, 10 N · m; 15 – drain hose; 16 – connecting branch pipe; 17 – toplivonalivny pipe
|
|
Fig. 5.1-2. Connection of a "mass" wire (1) with a metal ring (2) on a filling pipe of the fuel tank
|
At installation of a fuel broad tank check that the tip of a wire of connection "weighing" 1 (fig. 5.1-2) was reliably connected to a metal ring on a filling pipe of the fuel tank.
After installation of a fuel broad tank an ohmmeter check lack of resistance between a metal ring on a filling pipe of the fuel tank and "mass" of a body.
Otherwise check that the wire of connection with "weight" was reliably connected to the negative plug of the rechargeable battery